6 Reasons Why You Run Out of Hot Water

Hot Water

Not everyone enjoys a cold shower, so naturally having no hot water it’s considered a tremendous annoyance. Imagine you’re just in the middle of a cozy, hot shower- and then, the water turns to ice. Especially after a long tiring day when hot water seems to be the only way to ease away from that tension, feeling a sudden shock of cold water that remains can chase your right after you’ve finished your bath.

That said, you might not have to imagine such scenarios if it happens to you almost every day. It could be you’re using too much hot water than you used to. But when you begin to experience these issues more often- and this happens after five to ten minutes – then you should stop asking yourself why and start seeking new realistic solutions. You’re likely to have an issue with your boiler that’s causing you to run out of hot water when you least expect.

In this article, we’ll review some of the most common reasons you run out of water as well as solutions to overcome it.

1. Overusing Hot Water

Even though you may enjoy your long hot showers, the thing is that your hot water tank can only provide so much hot water at a certain time. When everyone in your family showers roughly at the same time or has several people in the household that rely on a sole hot water source, you may end up running out of hot water. This, in turn, leaves the last person to experience a cold shower.

Not only that but even with a few people in your household, long hot showers can easily cause your hot water tank to empty sooner than you think.

Moreover, if you’re using your dishwasher or the washing machine at the same time as your spouse has a shower, such great volume consumption of water can exceed the capacity of your storage tank or water heating system to keep up.

You can easily outrun the boiler capacity even if one person uses water to shower in the bathrooms while the other hand-washing dishes in the kitchen.

2. Small Hot Water Tank size

If you have a large family and you’re frequently run out of hot water, your hot water tank may be unsuitable for your needs or even broken. Do you have a family member who repeatedly uses hot water for hobbies or projects? Or do you have any family members who participate in sports and you have to do a great deal of hot water washing towels, uniforms, or socks? Consider these factors when deciding if your boiler size is large enough.

3. Tankless Water Supply Size

For a household with a large family, a tankless water heater is considered a disadvantage. Its main disadvantage is the upfront cost. Why? The smaller units simply won’t produce enough hot water to serve your family’s needs. They will only serve one faucet at a time – which is a problem if you want to wash the dishes while someone is taking a shower.

Replacing your current tankless water supply with a larger heating boiler, or seeking boiler rental companies to avoid this nuisance, will ensure your future hot water needs without further expenses. Make sure to do your research before replacing your central heating with a new one. Luckily, getting multiple boiler quotes is also very easy now that you can use boiler quote compare websites.

4. Mineral or Sediment Buildup

Sediments can be any solid material carried by water through pipes right into your water heater, causing a buildup of minerals. These sediments found in the water may be sand usually found in a water main or a well.

However, regardless of the filter your water heater uses, it doesn’t capture good minerals such as calcium, magnesium, or iron. The more minerals accumulate in the bottom on your hot water tank, the more room they take up – leaving less space for water. In turn, this causes the hot water tank to lose its capacity to hold the amount of water it was supposed to.

This can be one of the many reasons why your water heater becomes less efficient at providing and heating water to your household. Your home starts running out of hot water more rapidly. To indicate whether there is a sediment buildup, try to listen for cracking or popping sounds coming from your hot water tank.

5. Damaged or Worn Out Parts

One common cause for running out of hot water is the damaged, worn part of your hot water system. When these parts become worn out or damaged, the problems may get even more apparent when you try to use hot water. One element that may break or wear down because it’s immersed in water is the “dip tube.” The dip tube runs cold water down the hot water tank’s botting, exactly where the heating element is. But a deteriorated dip tube will mix cold water with hot water, getting the water warmish when it reaches you through the tap.

Not only that, but a broken thermostat can as well cause the hot water heater to deliver warmish or cold water or function improperly. However, in some instances, the thermostat may simply be set to low, where a simple adjustment is all you have to do.

If your water heater is gas-powered and you smell the gas, this may be due to a damaged aluminum rod. But when your hot water comes out in sprouts, more likely you’ll have to deal with a clog. When you notice pools of water around the base of your hater, the presence of mold might indicate a leak, which may be a pointer that your hot water tank cannot hold the amount of water it was supposed to store.

6. Burned-Out Elements

When all the heating elements in your hot water tanks are burned out, old, or simply not roomy enough, they fail at heating all the water the tank contains. Now and then, your water tanks may lose their functions as sediments accumulate. To find that out, you can use a water heating element and a continuity tester to determine whether you need to replace worn-out elements.

Solution? There is no one size fits all when it comes to hot water problems. But if your hot water tank is either worn out or simply can’t handle your household needs, you should consider upgrading to a more efficient unit.

Leave a comment

Your email address will not be published. Required fields are marked *