LED tube lights are clearing the market and quickly overtaking traditional fluorescent lamps as the most popular choice. Since it is not dependent on weather conditions, indoor/outdoor lighting, road lighting, spotlighting, etc. various LEDs are available on the market. When choosing the right LED light options, there are some things to consider.
This article provides recommendations on what to consider before purchasing an LED tube light from lepro.com.
How LED tube light works?
Unlike LED tube light technology, LED lamps to work on a different principle. At the end of the fluorescent tube is a tungsten filament that heats up in response to the magnetic field created by the AC flowing through the circuit.
Now, the heated wire provides a flow of electricity. The lamp starter allows electricity to flow. There is also a “ballast” in the LED tube fixture that controls the flow of electricity to prevent the filament from overheating. Therefore, it is essential to use ballast. Without ballast, the filament will overheat, and the tube will (probably) burst.
This tube is filled with argon and mercury vapor, which mainly emits UV light. Various chemicals with specific properties called “fluorescence” convert this UV light into visible light. These chemicals help form a coating inside the tube to create different colors.
LED tube light technology has several advantages over fluorescent technology. Energy efficiency and eco-friendly features are at the tip of the iceberg.
Reasons to prioritize LED tube lights over fluorescent lamps;
Having read the part above, you should be aware that LED tube lights operate in a cleaner and more efficient manner. It does not include requirements for LED operation, gas, filament heating, and additional components (such as ballasts and starters). However, some LED tube lights support the weight.
As you explore further, you will notice LED tubes have many advantages. Choosing to install LED fixtures does not go back to traditional lighting technology.
Practical Recommendations When Buying LED Tube Lights
1- Color temperature of the lighting
Before replacing a conventional light with an LED tube light, it is important to learn enough about color temperature. On average, the light range is from 2400K to 6500K. The temperature of 6000K creates a lively mood highlighting the blue light. Ideal for hospitals, art studios, and offices. The neutral look has an accurate, clean, and efficient look. The 4000K is ideal for offices, shops, supermarkets, and showrooms.
Choose 2700-3000K, which emphasizes red and orange tones to create a friendly and warm mood. This is suitable for your home, hotel lobby, or restaurant. Before buying a Lepro.com LED light, you need to know what color temperature is right for you.
2- LEDs without dimming
Conventional dimmers are used to limit the amount of electricity sent to incandescent lamps to control how bright the room is. Still, when dealing with LEDs, there is no direct relationship between brightness and energy.
To use a dimmer LED light, you need to consider two options. First, you can try to find an LED tube light that is compatible with conventional dimmers. Otherwise, you can use LED-compatible dimmer switches to replace your previous switching system.
3- Consider the long-term costs
When you buy lepro LED tube light, the initial cost is higher than you would pay for traditional lighting, but don’t be discouraged. Think of it as a long-term investment. Choosing an LED light can be economically beneficial. The cost of living of LED lights is much lower than traditional lights due to their long lifetime.
4- Thermostat conditions
LED tube lights are much more relaxed than traditional incandescent lamps. However, the coolant does not necessarily mean that it does not produce heat. In fact, the small amount of heat produced is absorbed by the cooler below and dissipated into the air.
If the device is in a confined space, there is no room to transfer heat. Look for LED lamps that can operate at above-average temperatures for such fixtures.
5- Picking the right panel
Changes to LED tube lights are possible but can be both time-consuming and costly. Most LED panels are made to industry-standard dimensions so that you can find the right size. Select the right size for your panel, so it fits easily in your space without the need for customization. For multiple lighting solutions, it is recommended to consider LED strips. Indoors, the T8 LED tube replaces the previous T8 fluorescent light.
6- Check the lumens for brightness
Unlike watts when choosing an incandescent lamp, the brightness is determined by lumens. A 150 W incandescent bulb is similar to a 25-28 W LED. From this, we can see that incandescent bulbs consume five times more watts than LED bulbs of the same lumen.
To achieve the desired output, it is recommended first to determine the desired brightness in lumens.
7- Adaptable to smart switches
Smart homes are the future of home automation. One of the basic requirements for smart homes is an intelligent switch. When purchasing an LED tube light, make sure it is compatible with your smart switch.
Lepro.com offers so many lighting benefits that many homes and businesses are switching to them. Consider these factors before you buy. To find unique LED tubes and slats for your home, industrial property, business, or anywhere else, check out the LED tubes and slats available at lepro.com.